Miata Cage Adjustable Sway Bar End Links

Adjustable drop links for the 1990-2005 Mazda Miata. Made from Aluminum and anadized in your choice of red or black. This kit is complete with 4 adjustable drop links. We supply the kit with clevis pins and cotter pins instead of nuts and bolts, so that you can make changes to the sway bar during qualifying without needing to unbolt the drop links. Simply remove the cotter pin, change the setting, and replace. The front drop links get spacers so that there is zero bind in the drop link in any of the 3 (1.6) settings. These work with both new (single shear) and old (double shear) style lower control arms.

You should have no bind in the sway bar links at all when installed. Other drop links on the market are too long, only right hand thread rod ends, and no spacers, so they have bind when the sway bar is in the full stiff position.

Drop links come with the following pieces fully assembled:
Spacers (2)
Left (4) and Right (4) hand thread heim rod ends.
Clevis pins (4)
Cotter Pins (4)
3/8 Bolts and Nylock Nuts (4)
Threaded (left and right) hex aluminum anadized body (4)

Design change from the large picture, each link has 1 cotter pin for the top and 1 bolt for the bottom attachment. See Inset picture for details